W11S Upper Roller Universal Plate Rolling Machine

> This machine is a special equipment to roll the plate into curve, cylinder, conical in the principle of the three point circle. The actions as below:
> Top roller move by vertical. Power: hydraulic oil tank. Role: put the pressure on the plate to make the plate bending deformation.
> Top roller move by horizontal. Power: electromotor. Role: adjust the horizontal distance between the top and bottom roller to make the top and bottom roller position in asymmetrical to pre-bend he sheet edge and decline the length of the flat zone.
> The bottom roller rotates. Power: electromotor. Role: supply the torque for the bending plate.
> Opening device drops down and reset. Power: hydraulic oil tank. Role: take out the finished workpiece.


• The upper roller is designed as a drum shape. Support roller installed in the lower of bottom roller to help to bending cylinder from thin to thick plate.
• Special bending craft, high precision pre-bending of the edge, digital control for the bending process.
• Rich shape bend such as O, U, R etc;
• Cone bending device for conical bend easily.
• Whole chassis, simple ground foundation, it’s convenient to move the workplace;
• According to the role or requirement of customer, economic digital display type or TNC digital control type is optional.
• CE certificate.